Sale!

Geovision GV-CS1320 2MP H.264 Camera Access Controller with a built-in Reader

Geovision

GV-CS1320: 2MP H.264 Camera Access Controller with a built-in Reader

$283.08

MPN: GV-CS1320 SKU: GEOVISION:GV-CS1320 Categories: , , , , ,

GV-CS1320: 2MP H.264 Camera Access Controller with a built-in Reader

GV-CS1320 is an access controller with a 2 MP camera and 13.56 MHz reader built in. GV-CS1320 recognizes access control cards and accordingly grants access to up to 100,000 users. Its camera captures a live view of the entrance and transmits it to the access control system GV-ASManager over a network, eliminating the need to install and maintain a separate camera.

For the operator to communicate with visitors at the door installed with GV-CS1320 and grant access, three types of notifications are available: SIP/VoIP Calling, GV-ASNotify PC program, and GV-Access mobile app.

When the touchpad on the GV-CS1320 is activated, it will make a VoIP call to the operator, allowing the operator to communicate with the visitor and enter an access code to unlock the door.

Key Features

  • 2MP progressive scan super low lux CMOS
  • Minimum illumination at 0.02 lux
  • Dual streams from H.264 and MJPEG
  • Up to 15 fps at 1920 x 1080
  • Day and night function (with removable IR-cut filter)
  • Built-in IR with effective distance up to 3 m (10 ft)
  • Ingress protection (IP66)
  • DC 12V, 2.5A / PoE+ (IEEE 802.3at)
  • Built-in microphone and speaker
  • Wide Dynamic Range (WDR)
  • Built-in micro SD card slot
  • Provides 180° panorama view
  • ONVIF (Profile S) conformant
  • Built-in 13.56 MHz Reader (Mifare DESFire, MIFARE Plus and MIFARE Classic)
  • Support for GeoVision proximity cards with GID (GeoVision Identifier) to enhance security
  • Access by card plus face detection
  • Up to 2 readers of RS-485, OSDP and network communication
  • 1 door (one-way or two-way control)
  • 2 inputs, dry contact (Door Sensor / Exit Button)
  • 1 relay output (Electric Lock)
  • Support for GV-I/O Box 4 Ports for door / fire / temper sensor, door button and doorbell applications
  • Touchpad to activate two-way communication between the operator and visitors
  • Snapshots captured upon card presented and touchpad activated
  • SIP / VoIP calling support
  • Anti-Passback (APB) support
  • Different access control modes enabled according to the Authentication Schedule: Card only mode (default), Card and Face Mode
  • GV-Access app for push notifications

Note:

  • To support face detection function, avoid placing the camera reader where the light source is directly behind the subject.
  • GV-CS1320 supports either RS-485 or OSDP communication, but not both at the same time.
  • RS-485 and network communications only support GeoVision readers, while OSDP is compatible with third-party readers.
  • All specifications are subject to change without notice.

Video