Sale!

Geovision GV-CR1320, GV-CR1320 2MP Camera Reader, H.264

GV-CR1320

  • 2MP progressive scan super low lux CMOS
  • Minimum illumination at 0.02 lux
  • Dual streams from H.264 and MJPEG
  • Up to 15 fps at 1920 x 1080
  • Day and night function (with removable IR-cut filter)
  • Built-in IR with effective distance up to 3 m (10 ft)
  • Ingress protection (IP66)
  • DC 12V, 2.5A / PoE+ (IEEE 802.3at)
  • Built-in microphone and speaker
  • Wide Dynamic Range (WDR)
  • Built-in micro SD card slot
  • Provides 180° panorama view

$248.99

MPN: GV-CR1320 SKU: GEOVISION:GV-CR1320 Categories: , , ,

Geovision GV-CR1320 2MP Camera Reader

GV-CR1320 is a 13.56 MHz card reader with a built-in 2 MP camera. GV-CR1320 recognizes access control cards and grants access as regulated by the connected controller. Its camera captures the live view of entrance and transmits it to the access control system GV-ASManager through network connection, without the need of installing and maintaining a separate camera in addition to the card reader.

VoIP Calls:
When the touchpad is activated, GV-CR1320 will place a call to the operator through VoIP. The operator can then communicate with the visitor and enter an access code to open the door.

Card Swiping plus Face Detection:
The Card and Face mode enables GV-CR1320 to perform face detection together with card verification before access can be granted.

Key Features

  • 2MP progressive scan super low lux CMOS
  • Minimum illumination at 0.02 lux
  • Dual streams from H.264 and MJPEG
  • Up to 15 fps at 1920 x 1080
  • Day and night function (with removable IR-cut filter)
  • Built-in IR with effective distance up to 3 m (10 ft)
  • Ingress protection (IP66)
  • DC 12V, 2.5A / PoE+ (IEEE 802.3at)
  • Built-in microphone and speaker
  • Wide Dynamic Range (WDR)
  • Built-in micro SD card slot
  • Provides 180° panorama view
  • Built-in 13.56 MHz Reader (Mifare DESFire, MIFARE Plus and MIFARE Classic)
  • Support for GeoVision proximity cards with GID (GeoVision Identifier) to enhance security
  • Access by card plus face detection
  • Network interface for connecting to and access control by controllers
  • Support for GV-WTR for connecting to and access control by 3rd-party Wiegand controllers
  • 2 inputs, dry contact
  • 1 relay outputs
  • Touchpad to activate two-way communication between the operator and visitors
  • Snapshots captured upon card presented and touchpad activated
  • SIP / VoIP calling support
  • Different access control modes enabled according to the Authentication Schedule: Card only mode (default), Card and Face Mode
  • GV-Access app for push notifications

Note: 

  • To support face detection function, avoid placing the camera reader where the light source is directly behind the subject.
  • All specifications are subject to change without notice.