Sale!

E222

2MP Security Surveillance Indoor/Outdoor with D/N, Extreme WDR, SLLS, Vari-focal Lens

  • Security Surveillance
  • 2 Megapixel
  • Day & Night with Superior Low Light Sensitivity
  • Vari-focal Lens with f2.8-12mm/F1.4, DC iris
  • Extreme WDR
  • Wide Angle
  • Built-in Analytics

$444.00 $397.00

SKU: ACTI:E222 Categories: ,

Description

Device

Product Type Box
Maximum Resolution 2MP
Product Application Security Surveillance
Application Environment Indoor/Outdoor
Image Sensor Progressive Scan CMOS
Sensor Size 1/2.8 “
Effective Pixels 1944(H) X 1224(V) (2.38 MP)
Day / Night Yes
Low Light Sensitivity Superior
Minimum Illumination Color: 0.1 lux at F1.4 (30 IRE , 2400 K); B/W: 0.05 lux at F1.4 (30 IRE, 2400 K)
Color to B/W Switch ISP based switch, configurable
Mechanical IR Cut Filter Yes
IR Sensitivity Range 700-1100nm
IR LED No
Electronic Shutter 1/5-1/2000second (manual mode); 1/5-1/10000second (auto mode)
Horizontal Resolution (TV Lines) 1100 TVL
S/N Ratio 56 dB

Lens

Focal Length Vari-focal, f2.8-12mm
Aperture F1.4
Iris DC iris
Focus Manual focus
Lens Mount CS Mount (interchangeable lens)
Horizontal Viewing Angle 87.5° – 32.1°
Vertical Viewing Angle 49.3° – 18.9°

PTZ

Pan, Tilt or Zoom protocol Visca, Pelco-D, Pelco-P

Video

Compression H.264 (Baseline/ Main/ High profile), MJPEG
Maximum Frame Rate vs. Resolution 60 fps at 1920 x 1080
60 fps at 1280 x 720
30 fps at 640 x 480
30 fps at 320 x 240
Multi-Streaming Simultaneous triple streams based on three configurations
Bit Rate 128Kbps – 12Mbps (per stream)
Bit Rate Mode Constant, Variable
Wide Dynamic Range Extreme WDR (145 dB)
Image Enhancement White Balance, Brightness, Contrast, Sharpness, Automatic gain control, Flickerless, Digital Image Stabilizer, Defogging
Digital Noise Reduction 2D + 3D DNR
Privacy Mask 4 configurable regions
Text Overlay Yes
Built-in Analytics Basic Face Detection, Object Based Motion Detection, Tampering Detection, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Object Loitering Detection
Server-based Analytics Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy)
Image Orientation Rotation
IVS performance Certain algorithms may require more computing power, which may limit the number of algorithms that can be concurrently used in the camera. Please test the actual performance before using in a project.

Audio

Audio Type 2-way, Line-in, Line-out
Audio Compression 8 kHz, 16 bit encoding, Mono, PCM, G.711

Network

Network Protocol & Service IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X
Ethernet Port 1 x RJ-45 connector
Security IP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control

Video Analytics

Analysis Source Type Video
Metadata Accuracy Standard

Event

Event Trigger Video motion detection (10 regions), External device through digital input, Sound detection, Intelligent event detection,
Event Response Notify control center, Change camera settings, Command other devices, E-mail notification with snapshots, Play the audio file, Push notification to mobile device, Save video to local storage, Upload video to NVR server, Upload video or snapshot to FTP server, Activate external device through digital output

Integration

Unified Solution Fully compatible with ACTi software
Software Development Kit Yes
GPS Position Manual setting
ONVIF Compliant Yes, Profile S, Profile G
GB28181 Compliant Yes
Web Browser IE 11
Auto Firmware Upgrade Yes

Interface

Serial Port 1 x RS-485/RS-422
Audio Interface Terminal block
Local Storage MicroSDHC, MicroSDXC memory card slot (card not included)
Digital Input/Output 1/1

General

Power Source PoE Class 3 (IEEE802.3af)
Power Consumption 7 W (PoE)
Weight 450g (0.992lb)
Dimensions (W x H x D): 67mm x 65mm x 145mm (2.6″ x 2.5″ x 5.6″)
Environmental Casing Optional housing (IP66)
Mount Type Bracket, Pole Mount, Corner Mount
Starting Temperature -10°C ~ 50°C (14°F ~ 122°F)
Operating Temperature -10°C ~ 50°C (14°F ~ 122°F)
Operating Humidity 10% – 85% RH
Approvals CE, FCC, UL (for optional PoE injector)
Warranty 3 Year(s)
Extended Warranty 2 Year(s)